CRACKAMITE is a Non-Explosive Silent Cracking/Demolition Agent
which works by providing silent expansive cracking.

Most effective solution for Rock Breaking, Stone Quarrying,
Mining, Concreate Demolition, Excavations and More...

MATERIAL SAFETY DATA SHEET

Section I

Material Name & Description CRACKAMITE (Non-Explosive Demolition Agent)
Manufacturer’s name Hydraulics & Pneumatics
Address B-85, Bais Godam Industrial Estate,
Jaipur - 302 006 Rajasthan, INDIA
Telephone Number +91-141-3220774

Section II - Hazardous Ingredients / Identity Information

1. HAZARDOUS COMPONENTS: NONE
2. NON-HAZARDOUS CHEMICAL COMPOUNDS: (% by Weight)
     2.1 Silicon Dioxide (SiO2) 5.1%
     2.2 Aluminum Oxide (Al2O3) 1.6%
     2.3 Ferric Oxide (Fe2O3) 2.5%
     2.4 Calcium Oxide (CaO) 89.6%
TOTAL:    98.8%
  • CRACKAMITE works without any vibration, noise, flying rock, dust and toxic gases by providing silent cracking.
  • CRACKAMITE is environmentally safe.
  • Proper application of CRACKAMITE is not harmful to fresh water sources (lake, river), plants (trees, grass), animals (fish, birds or other wildlife).

Section III - Physical/Chemical Characteristics

Boiling Point Not Applicable Specific Gravity (H20 = 1) 3.20
Density 3.2 gm/cm3 Bulk Density 1150 Kg/m3
PH Value (at 10g/ 1 H2O) 13 Melting Point 1000°C
Solubility in Water Slight
Appearance and Odor Gray Powder, No Odor

Section IV - Fire and Explosion Hazard Data

Flash Point (Method Used) Not Applicable Flammable Limits Not Applicable
Extinguishing Media Not Applicable Special Fire Fighting Procedures Not Applicable
Unusual Fire and Explosion Hazards When mixed with water, the product expands under high temperature development.

Section V - Reactivity Data

Stability Unstable   Conditions to Avoid - Not Applicable
Stable YES  
Incompatibility (Materials to Avoid) Water (Only Storage)
Hazardous Decomposition or Byproducts None
Hazardous Polymerization May Occur   Conditions to Avoid - Not Applicable
Will Not Occur YES  

Section VI - Health Hazard Data

Route(s) of Entry Inhalation? Avoid Skin? Avoid Ingestion? Avoid Eye Contact? Avoid
Health Hazards (Acute and Chronic)
1. Skin and eye contact: Irritation, Burn
2. Inhalation and Ingestion: The same symptoms as getting cement or quicklime will appear.
Carcinogencity NTP? IARC Monographs? OSHA Regulated?
Not Applicable Not Applicable Not Applicable
Signs and Symptoms of Exposure
  • Since the product is an alkali material, skin etc. may be irritated.
Medical Conditions
  • Generally Aggravated by Exposure.
  • Skin and eyes may be irritated and burn unless immediately rinsed off.
Emergency and First Aid Procedures
  • If the skin comes in contact with the product, rinse it off with clean water immediately.
  • If eyes come in contact with it, rinse it off with clean water immediately,and consult with a doctor as soon as possible.

Section VII - Precautions for Safe Handling and Use

Steps to Be Taken in Case Material Is Released or Spilled
  1. Gather the released or spilled product with a broom or a shovel.
  2. Mix it with a large amount of water.
  3. Sprinkle it onto open ground.
Waste Disposal Method
  1. Mix it with a large amount of water
  2. Sprinkle it onto open ground.
Precautions to Be Taken in Handling and Storing
  1. Store the product under dry condition
  2. Always wear safety goggles for eye protection, dust-proof mask and rubber gloves.
Other Precautions
  • When mixing the product with water, do not get close to holes filled with the mixture of the product and water to avoid any accident to be caused by blow-out.

Section VII - Control Measures

Respiratory Protection It is recommended to wear ordinary dust-proof mask.
Ventilation Local Exhaust - Not Applicable Special - Not Applicable
Mechanical - Not Applicable Other - Not Applicable
Protective Gloves Ordinary Rubber Gloves Eye Protection Safety Goggles
Other Protective Clothing or Equipment Not Applicable
Work/Hygienic Practices Not Applicable